SecureHold Dryer Vent Cleaner Kit
$15.99
For every home with a clothes dryer:
Suck Out the Hidden Lint Your Lint Screen Misses, Before It Starts a Fire
A slim 31.5-inch hose slips onto the vacuum you already own and reaches deep into the lint trap slot and the vent, where packed lint hides and heats up.
Secure checkout
Description
SecureHold was made for the lint you never see. Not the fuzz on your lint screen. The gray, packed lint sitting deep down the trap slot and back in the vent, where it can build heat every time you run a load.
The hose stretches right over the end of your vacuum hose. Then it slides down the lint trap slot and into the vent and pulls out the lint you can't reach with your hand. The long brush and 2 crevice brushes loosen anything stuck, and the gloves keep your hands clean.
No technician visit. No taking the dryer apart. No new vacuum to buy.
Why do you need SecureHold?
If you only clean the lint screen, you're doing what most people do. But the screen only catches what lands on it. The rest slips past and packs down below, where you can't see it, month after month.
SecureHold is for anyone who'd rather spend a few minutes now than worry later. If your dryer takes two or three cycles to dry a load, that's lint telling you it's time.
Benefits
- Pulls out packed lint your lint screen misses
- Helps prevent the lint buildup that starts dryer fires
- Clothes can dry faster, without running the dryer twice
- Skip the $100+ technician visit
- Fits most vacuums and most dryer types
- Also cleans AC vents, blinds and car seats
How to use
Unplug the dryer and pull out the lint screen. Stretch the connector over the end of your vacuum hose. Slide the hose down the lint trap slot and turn the vacuum on. Then do the vent behind the dryer. Use the brushes to loosen anything stuck.
Always unplug your dryer before you clean it.
Our 30-Day Guarantee
Every order is covered by our 30-Day Money-Back Guarantee. Try SecureHold on your dryer. If you're not happy with how much lint it pulls out, email us for a full refund, even if you've used it.
The Lint You Can't See
Where dryer fires really start
Thousands of home fires start in clothes dryers every year, and the leading cause is failure to clean them. Most of that lint hides past the screen.
What SecureHold Customers Are Saying
Real reviews from real customers
“I didn’t even know you were supposed to clean your dryer vent. When I pulled the brush out the first time I almost threw up. So much lint. Dryer works twice as fast now.”
Tom R., 52 Verified Buyer
“Our dryer was taking two cycles to dry anything. My wife found this and I cleaned the vent in 20 minutes. One cycle and everything’s dry. Should have done this years ago.”
Mark S., 47 Verified Buyer
“The flexible brush fits around the bends that the shop vac couldn’t reach. Pulled out a solid brick of lint that was at least five years old. Our energy bill dropped the next month.”
Dave K., 58 Verified Buyer
“I was quoted $150 to have someone come out and clean the vent. This kit cost me a fraction of that and I did it myself in my garage. Saved money and it’s so satisfying.”
Chris M., 43 Verified Buyer
“After our neighbor had a dryer fire I got scared and ordered this. The amount of lint I pulled out was terrifying. Our dryer runs cooler and quieter now. Peace of mind.”
Lisa W., 39 Verified Buyer
“I use this every six months now. Takes ten minutes and my dryer runs like new every time. The attachments fit my drill so it’s basically zero effort.”
Brian P., 55 Verified Buyer
Clean Your Lint Screen Every Load? The Danger Is Deeper Down.
Most people do the same thing. Pull the screen, peel off the fuzz, slide it back in. It feels like the job's done. It isn't. The screen only catches what lands on it.
The rest slips past and packs down the trap slot and into the vent. Lint blocks the air. Heat builds up with nowhere to go. That's how one more load turns into a tragedy.
Thousands of home fires start in clothes dryers every year, and the leading cause is failure to clean them. Not the screen. The whole thing.
That's why so many people notice:
- Your dryer takes two or three cycles to dry one load, and you think it's broken
- You clean the screen every load and figured that was the whole job
- You moved in and have no idea how long the lint's been building up
- Paying a technician just to clean out lint
That's why a lint screen and a quick wipe aren't enough. Your hand can't reach down that slot, and a regular vacuum nozzle is too fat to fit. So the lint keeps piling up, and that's how nearly 17,000 dryer vent home fires start every single year.
But there's an easy way to get it out yourself.
One Slim Hose. Your Own Vacuum. That's the Kit.
No special tools and no taking the dryer apart. Just a hose that reaches where the lint really is, plus brushes.
Your vacuum already has the suction. It just can't reach. The hose turns it into a long, skinny arm that goes deep into the slot and the vent.
That's long enough to reach deep down the lint trap slot and into the vent behind the dryer.
Fat, stiff hoses don't fit and clog fast. This one is slim so it fits more dryers and lint passes freely.
Some lint sticks. The 22-inch brush and 2 crevice brushes loosen it, so the hose can suck it right up.
No need for:
- A technician visit
- A new vacuum
- Taking the dryer apart
- Special tools
What One Slim Hose Actually Does for Your Dryer
If cleaning the screen is all you've ever done, here's the difference. SecureHold goes after the lint you never see, not just the fuzz on top.
Fits Your Vacuum
No new vacuum neededThe stretch connector slips over the end of most vacuum hoses. Stick, upright or canister, it just goes on.
Goes Deep
Where your hand can't goThe slim hose slides all the way down the lint trap slot and into the vent behind the dryer, where packed lint sits.
Pulls It Out
Years of buildup, goneTurn the vacuum on and watch the gray lint come out. Most people can't believe how much was in there.
Dries Again
Air flows, heat leavesWith the lint gone, air can move again. Loads can dry faster, and heat isn't trapped in the vent.
Your First Clean With SecureHold
It takes a few minutes. Here's what it usually looks like.
You slide the hose down the slot and see it: the packed gray lint the screen never caught, coming out in clumps.
Your clothes may come out dry in one cycle again, instead of running the dryer a second or third time.
A quick clean whenever you want, with your own vacuum. No calling anyone, and less worry every load.
Why So Many People Now Clean Their Own Dryer Vent
You clean the screen. Maybe you've tried a skinny brush or the vacuum nozzle. Maybe you've thought about calling someone. If the lint still keeps coming back, this is for you.
The lint screen catches what lands on it. That's it. The lint that slips past packs down the slot and into the vent. SecureHold goes after that part.
A normal vacuum nozzle is too fat for the lint trap slot. This slim 31.5-inch hose slides all the way down.
The stretch connector fits most vacuums, and the slim hose fits most dryers. Nothing new to buy.
Other hoses are fixed sizes and clog easily. This one is slim and lets the lint pass right through.
No booking a $100+ visit and waiting around. You do it yourself in a few minutes, whenever you want.
One slim hose, a long brush, 2 crevice brushes and gloves. Made for the lint your lint screen misses.
SecureHold vs. Other Kits
SecureHold vs. Other Kits
 SecureHold |
Others | |
|---|---|---|
| Fits most vacuums | Varies | |
| Slim hose, fits more dryers | Varies | |
| Hose, 3 brushes and gloves included | Varies | |
| 30-day money-back guarantee | Varies |
Frequently Asked Questions
Will it fit my vacuum?
Most likely, yes. The stretch universal connector slips over the end of most vacuum hoses, including stick, upright and canister vacuums. You just stretch it on and start cleaning.
Will it fit my dryer?
The hose is slim so it fits most dryer types, whether the lint trap slot is on top or just inside the door.
I already clean the lint screen. Isn't that enough?
It's a great habit, but the screen only catches what lands on it. The lint that slips past packs down the slot and into the vent, where you can't see it. That's the lint SecureHold pulls out.
Can I clean the vent behind the dryer too?
Yes. Use it down the lint trap slot, inside the drum opening, in the vent behind the dryer, and at the vent on your outside wall. The long brush helps loosen lint that's stuck.
How fast will I notice a difference?
Right away. You'll see the lint come out the first time you use it. Many people notice their next load dries faster too. And you get 30 days to try it.
What else can I clean with it?
AC vents, blinds, window tracks, under the couch and other furniture, car seats, and those tight corners around the sink.
Can a simple hose really make a difference?
That's what a lot of our customers thought, too. Then they put it down the slot and saw how much lint came out. It's simple on purpose: a slim hose on the vacuum you already own.
What if it doesn't work for me?
You're covered by our 30-Day Money-Back Guarantee. If you're not happy with it, email us within 30 days for a full refund, even if you've used it.
How long does shipping take?
Every order ships with tracking, and we email you the link as soon as it's on the way.
Always unplug your dryer before cleaning. Dryer fire facts: U.S. Fire Administration and NFPA.